dimensions standard frequency (mhz) frequency stability supply volt change supply voltage current consumption output voltage load aging frequency trim range case code 12.8 14.4 15.36 ?.5 10 ? ?.0 10 ? ?5~+55? 0~+50? ?.3 10 ? /+5v?% +5vdc 1.5ma max 1v (peak to peak) min 10k ? //10pf ? 10 ? /year ? 10 ? min 11a simple packaged crystal oscillators 3200 series model 3211a specification main applications: digital cordless telephone features 8 height 3.9mm, volume 0.43 j , weight 1g (light & small) 8 surface mount type (both laser soldering method and low tem- perature soldering method are applicable. for low temperature soldering, please con- tact us for temperature profile.) 8 low power consumption crystal oscillators 7.62 0.2 3.9 0.2 freq.adj. ?.4 11.4 hollow 9.6 0.15 7.0 0.5 12.6 0.2 1.0 0.1 +dc output gnd gnd model 3211a item spec. code anf50 apa50 114 note: frequency adjustment condition (1) adjustment is conducted in room temperature (+25??). (2) for adjustment, oscillator is placed on the printed board which has earth pattern. this oscillator is shipped after frequency adjustment at ndk. but if you need to trim frequency by trimmer condenser, please make sure that the driver fits trimmer rotor hole. also do not apply pressure to trimmer rotor. if you need non-standard spec. for frequency, low voltage, please contact us. 11a (mm)
10 10.625 12.8 10~15 ? 10 ? ?.5 10 ? 0~+50? ?5~+55? ?.3 10 ? /+5v?% +5vdc 3ma max 1v (peak to peak) min 20k ? //5pf ? 10 ? /year ? 10 ? min 18d standard frequency (mhz) frequency range (mhz) frequency stability supply volt change supply voltage current consumption output voltage load aging frequency trim range case code model 3218d main applications: cordless telephones features 8 high-reliability metal package (grounded) 8 low power consumption 18.3 11.7 3-?.5 4 7.5 5 1 4 freq.adj. 15 0.3 7.5 0.3 gnd output 2.5 0.3 +0 1.2 - 0.5 +dc model 3218d item spec. code apa60 anf60 115 note: frequency adjustment condition (1) adjustment is conducted in room temperature (+25??). (2) for adjustment, oscillator is placed on the printed board which has earth pattern. this oscillator is shipped after frequency adjustment at ndk. but if you need to trim frequency by trimmer condenser, please ma ke sure that the driver fits trimmer rotor hole. also do not apply pressure to trimmer rotor. if you need non-standard spec. for frequency, low voltage, please contact us. 18d (mm)
|
